OneCNC Series Updates

This is a history of all OneCNC updates.

You may notice sometimes there can be a jump in version numbers.

This is due to intensive and continual internal testing where we thoroughly test versions before releasing proven functional updates.


To download updates, see our OneCNC Updates page.

OneCNCXR2 8.36

Server Note:

The update server has been enhanced and you should now be able to better access the updates directly from the OneCNC Today tab and select OneCNC Updates

 

New Version Update OneCNCXR2!

Update OneCNCXR2 V8.36 release date 20th December 2007

OneCNCXR2 Lathe Dutch Version
OneCNC XR2 Lathe Express and OneCNCXR2 Lathe Professional have now had Dutch language added to the product install.

OneCNCXR2 Mill Expert with 5 axis module
OneCNCXR2 Mill Expert with 5 axis module has had modification added to correctly position the start point for Spiral and Radial tool paths in 5 axis positional mode.

Note:
There are no other updates so unless you require OneCNCXR2 Dutch language Lathe or you are using OneCNCXR2 Mill Expert with 5 axis functionality there is no need to update to this version.

Read More...

OneCNCXR2 8.35

Update OneCNCXR2 V8.35 all versions release date 19th October 2007

OneCNCXR2 all versions

The display of the file transparency in File> Trace Image> that was turned off due to the complications of Windows Vista is now again functional.

OneCNCXR2 Lathe all versions

The has been a modification the the Lathe tool library to cover reported problems creating and or saving certain grooving tools.

Read More...

OneCNCXR2 8.32

Update OneCNCXR2 V8.32 all versions release date 8th September 2007

OneCNCXR2 all versions

Adjustment to DXF import to better handle invalid entities being output by other CAD.

OneCNCXR2 All Milling versions

The Hole wizard was modified to better handle switching between incremental and absolute during editing and changing of absolute and incremental during editing.

Hole wizard chamfer was modified to eliminate the confusion between absolute and incremental as it now just works from material top.

OneCNCXR2 Lathe all versions

OneCNCXR2 lathe post was altered on the general settings page General Format> Tool Format.

There were three settings in the box T0101 T101 and T1

There are now just 3 settings T0101 and T101

There is no change in the action the T1 was removed to assist in eliminating confusion.

If a machine post requires the T1 format you would now remove the {D} offset in the post.

Note:
T0101format actually means T01 being the tool number and the next 01 being the offset format not the ability of 9999 too. T101 being the less popular the T1 is the tool number only and the following 01 again being the offset.

There is no need for any changes to your post with this change the modification has been made just to assist in preventing incorrect in the lathe post.

Read More...